SIGA Wigluv 100 4" Wide Exterior Air Sealing Tape

Product Description

SIGA Wigluv 100

Length/roll: 82'

Width: 4"

Wigluv 100: The single-sided high-performance adhesive tapes Wigluv 100 and 150 have all of the same benefits of Wigluv 60 in a wider format. Benefits include high vapor permeability, quick application, and its high reliability. Use for sealing the walls to the concrete foundation or slab by priming any masonary material with SIGA Dockskin. These tapes have a split backing for ease of application at corners. Driving rain resistance in combination with Majcoat has been proven by the TU Berlin

OSB application issues: OSB varies from mill to mill across the US. In most cases, Wigluv will bond to the smooth face of OSB without issues. Please test your application and if you have doubts about the bond after 24 hrs, please prime the joint with SIGA Dockskin primer. In our experience, no tape will stick to the rough side of OSB without the use of a primer like SIGA Dockskin. If you are planning on taping to the rough side of OSB, plan on using dockskin primer. Once primed, Any SIGA tape will adhere to the rough surface of OSB and bond well.

Advantages:

• High adhesive strength at high and low temperatures - reliable, no building damage
• Diffusible sd < 2m - prevents condensation build-up
• Slit backing strip - simple and quick to apply

Suitable Substrates:

• Wood
• Woodfibre boards *
• Hard wood-based panel materials
• Gypsum fibreboards
• Cement fibreboards
• Concrete, masonry, plaster *
• Bituminous sheeting in the base area
• Perimeter insulation
• Metals
• Hard plastics
• Electric cables* must be reinforced with SIGA-Dockskin high-performance primer

Suitable Membranes:

• Vapour control layers / diffusion retarder sheeting for above-rafter insulation and renovation from the outside - Smooth to rough PE/PA/PO/PP sheeting
• Roof underlay membrane - (apart from bitumen and PVC membranes except if given individual approval)
• Facade membranes